Led Display Module With Magnet
Led module, also called as led tile, is actually the basic unit of the modular design of led display. With the small led modules in size such as 160mm x 160mm for P10, 256mm x 128mm for P16, you could build the led screen with closest size to your requirement.
To assemble the led module, usually the workers in the manufacturers would use screw. There are led modules with screw holes behind, which is the most common seen type; and there are led modules with screw holes on front, which is the front service type led module. You could contact our sales engineers to learn more information about that.
Here we're going to introduce the led module assembled with magnet. This kind led module is actually the spec with screw holes behind. Based on this common seen spec, we assemble the magnet behind, so that the led module could be absorbed on to the Iron structure.
In this way, we can use the same type led cabinet for the assemble. (there would be too many led modules to be assembled if you assemble the led modules one by one, to make a big led screen, so we build the Iron cabinet close to 1x1m, assemble the led modules and other components, wire it ready. So the basic modular unit for your installation would be the led cabinet. We make it 1x1m approximately is because this size is easy for the transportation, as well as the handling.)
There is no screw used for the led module assembly, so the first advantage is it's very easy to maintenance - you'd just need to take out the module for the replacement; another advantage is that it could be serviced from the front side, and this is very good if you'd assemble the led screen close onto the wall.
There is no screw used for the led module assembly, so the first advantage is it's very easy to maintenance - you'd just need to take out the module for the replacement; another advantage is that it could be serviced from the front side, and this is very good if you'd assemble the led screen close onto the wall.
But to be noticed is - this kind led module assembly method could only be adopted to the indoor led screen. Since the magnet makes a little distance between the led module and led cabinet, there would be surely the gaps, so it would not be waterproof.
If you're interested in this type led modules, or the led screen assembled with this type led modules, please do not hesitate to contact us for an offer.
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home